Midi2Org 16

Midi2Org 16

In stock


Price incl. VAT

The Midi2Org_16 completes the Orgautomatech range. It will be useful to:
  • Add a new pipes rank to your organ
  •  Add percussions
  • Automate a small instrument (xylophone, metallophone...) For any project requiring just a few outputs: driving some lights, engine or something else, within the board limits, of course.
  • Automate a recorder or any other monophonic wind instrument (saxophone, clarinet ...). With, in this case a special program to open multiple outputs with a single note.
  •  Same features as all Orgautomatech midi boards.
Main features

16 output, 35 volt , 500 mA each

         max size: Only 100 * 50 mm: can fit in any instrument, even the smallest..

all ouputs are clearly marked on the board.

Midi channel can be changed directly on the board by push button and LED, no need of any computer. Useful "on stage" to play together with friends.

Responds to note-on, note-off, all note off (CC123)

Considers note-on with velocity 0 as note-off

Supports MIDI running status

Easy mapping of outputs by «self-learning» ( with Midilector ie) or with the freeware "Parametor".

ULN2803 chips are not soldered on the board. In case of an accident (for example a short circuit in a solenoid) they are very easily replaced.

New : For security, limitation of the notes number playing together. This feature can be set by the user himself with Parametor

Protection against bad polarity

Compatible with every midifiles player in respect to MIDI standard

The MIDI OUT socket acts as a MIDI THRU. That means that every message that arrived via MIDI IN goes out via MIDI OUT except active sensing messages.

Can be configured in "latch"mode. One short note opens the output, the same short note again closes the output. Set up by the user himself with Parametor.

On demand, one or more outputs can be programmed to respond to sustain or another control change of your choice

On demand, can be programmed to drive any monophonique instrument like a recorder or a saxophone

         Arrived fully tested with all components mounted

        Designed, programmed and made at Niort, France


What to do with a midi board?  

Doing the interface between your computer (or player as MIDILECTOR Midi) and your mechanical musical instrument (organ, piano, accordion ..). You plug a MIDI cable / USB from the computer to the MIDI board. Connect an electromagnet at each board output. These solenoids open valves or pull on levers to produce notes on the instrument. The board job is to switch on or off the electromagnet corresponding to the note read in the MIDI file on the computer or Sd player.

You can also drive DC lights, within the board limits 220 volt lights can be driven by use of relays.


Additional product information

Handbook Download

Browse this category: Midi decoder boards